UHF RFID Desktop Reader writer

Product Description Features:

UHF RFID Desktop reader is one of the most widely used RFID Reader. UHF Desktop reader & writer generally used for tag registration and activation. It works on global UHF frequency protocols and is used for quick tag authentication, tag read and write, activation and tag blocking /killing. With an anti-collision algorithm and high tag read/write capability this device can be used in any industry application. It is portable in nature and can be carried easily because of its compact design and quick installation method which is USB, This reader supports USB, interface via which the data is transmitted to the connected PC. The product is IP 40 rated and certified by CE and FCC. tag time: No more than 5ms every 8 bytes when reading, 25ms every 4bytes when writing.

The Standalone UHF Gen2 RFID Reader/Writer is designed for the desktop. It is compatible with both EPC Class1 GEN 1 and GEN 2 Protocols operating in the UHF. Self-intellectual property; Support ISO18000-6C (EPC C1G2),ISO18000-6B protocol tag; FHSS or Fix Frequency transmission; RF output power up to 30dbm(adjustable); Support auto-running and interactive work mode; Support USB interface; Output format and parameters configurable;

UHF - Desktop UHF reader/writer

High Speed Read/Write on UHF Tag
Support Auto-running and Interactive Work Mode
Support ISO180006B/6C Gen2 protocol cards read/write function.[ Please note: Not support IOS system]
Operating Frequency: 865- 868 MHz frequency band. Reading range can up to 50 cmPlease note: Not support IOS system, Don't read the Credit bank card.
It read/write UHF (Ultra High Frequency,860~960Mhz) card/tag. Not read 125khz/13.56Mhz,Can't support HID, Cobra, APCiK etc.
If you have existing card to be compatible and not sure the type, please contact us to confirm before order.
Antenna: Built-in small circular polarization antenna

Specifications

Model No.		IDTS – 107 UDR

Frequency range		Standard ISM 865-868 MHz, 902-928MHZ(or customized)

Protocol		ISO18000-6B, EPC Class 1 Gen2(18000-6C)

FM mode		FHSS

RF output		0-30dBm adjustable;50Ω load

Communication		RS232,RS485,Wiegand26/34,IEEE 802.11 (TCP/IP & Wifi
interface		can be customised)

Application software		Provide with Demonstration Software and SDK

	Tag Operation Performance
Reading distance	0 – 300mm equipped with 2.5 dBm circular polarized
	antenna(tag dependent)

Air interface	EPC global UHF ISO-18000-6C(EPC G2), ISO-18000-6B

Operating Mode	Answer, Active, Trigger

Reading Rate	Software Programmable

Reading Clue