QR Code and RFID Card Reader IDTS-QR-36
A wall-mounted access reader that reads both QR codes or barcodes and EM or MIFARE RFID cards, then passes the result to your access controller over Wiegand, RS485, RS232 or TTL.
- Model:
- IDTS-QR-36
- Brand:
- Identium
- Interface:
- Wiegand 26/34, RS232, RS485, TTL
- Read range:
- Cards 3–6 cm; QR codes 0–20 cm
- Datasheet:
- PDF · 184 KB
- Listing updated:
₹15,000
per piece + 18% GST
₹17,700 incl. GST
Min. order 1 pieceBuy online and pay by NEFT or UPI, or request a quote
- 7-day replacement · 1-year warranty against manufacturing defects
- Blue Dart next-day delivery
- Buy online, pay by NEFT or UPI · in-stock items are dispatched the same day after payment · shipping ₹300 per kg + GST
Sold by India RFID Store, the online catalogue of Identium Tech Solutions Pvt Ltd, an RFID manufacturer in New Delhi, India, in business since 2010.
Key features
- Reads QR codes, 1D/2D barcodes and EM or MIFARE RFID cards
- Wiegand 26/34, RS485, RS232 and TTL outputs
- Standard 86 box size: 86 × 86 × 18 mm, 150 g
- Card read at 3–6 cm, QR codes at 0–20 cm, response under 200 ms
- Zinc alloy frame with acrylic panel, -20 °C to 70 °C operation
- Blue standby light, green read light and built-in buzzer
Overview
What the IDTS-QR-36 QR code and RFID reader does
The IDTS-QR-36 is a wall-mounted access reader that accepts two kinds of credential: printed codes (QR codes and one- or two-dimensional barcodes) and RFID cards (EM or MIFARE). Visitors can be let in on a QR pass while staff keep using their cards, all through one reader at the door or gate.
The 86 × 86 × 18 mm body is built to the 86 box wall-mounting standard, so it fits an 86-type back box. The frame is zinc alloy with an acrylic front panel.
This is a reader only. It does not store cards, users, passwords or fingerprints. It passes the code or card number to an access control panel, card time attendance machine or multi-door controller, which decides whether to open the door.
How it connects
The reader outputs Wiegand 26/34 for access controllers, RS485 for bus wiring, and RS232 or TTL for a PC or embedded board (Windows XP/7/8/10 and Linux are supported). It runs on 8–12 V with an 800 mA working current, so size the power supply for that load. The wire colours are:
| Wire | Wiegand 26/34 | RS485 | RS232 |
|---|---|---|---|
| Power | Red: 12 V | Red: 12 V | Red: 12 V |
| Ground | Black: GND | Black: GND | Black: GND |
| Signal 1 | Green: D0 | Brown: 485A | Blue: RX |
| Signal 2 | White: D1 | Orange: 485B | Yellow: TX |
Where it is used
- Visitor entry in office buildings and residential societies
- Staff entry at tourist sites and administrative halls
- Gates, turnstiles and visitor machines
- Smart home door access
Installation notes
Switch off the power before fitting or removing the reader. The rated distances (3–6 cm for cards, up to 20 cm for QR codes) assume no electromagnetic interference and a card held parallel to the reader face; interference nearby will shorten them. For a complete door setup, see our guide to RFID access control systems, and choose matching cards from our RFID cards range.
Where the IDTS-QR-36 is used
- Office visitor entry
- Residential society gates
- Turnstiles and gates
- Visitor kiosks
- Tourist site staff entry
- Administrative hall access
- Smart home doors
Specifications
Datasheet (PDF)| Card type | EM card or MIFARE card |
|---|---|
| Barcode types | QR code, 1D and 2D barcodes |
| Decoding | Image decoding |
| Interface | Wiegand 26/34, RS232, RS485, TTL |
| Read range | Cards 3–6 cm; QR codes 0–20 cm |
| Read speed | Under 200 ms |
| Barcode reading angle | 45° around the lens centre |
| Scan mode | Automatic induction with buzzer prompt |
| Power | 8–12 V, 800 mA working current |
| Dimensions | 86 × 86 × 18 mm |
| Mounting | Standard 86 box |
| Weight | 150 g |
| Material | Zinc alloy frame, acrylic panel |
| Indicators | Blue light in standby; green light for about 0.5 s on a read; built-in buzzer |
| Operating temperature | -20 °C to 70 °C |
| Humidity | 10–90% |
| Compatible with | Windows XP/7/8/10, Linux |
Frequently asked questions
Does the IDTS-QR-36 store users or cards?
Which cards does this reader accept?
How far away can a card or QR code be read?
Can I connect it to a PC instead of an access controller?
What power supply does it need?
Used in these RFID solutions
Buying guides
Related products
HF Library Staff Pad, ISO 15693, USB (Check-In / Check-Out)
Price on request
Per piece
PN532 NFC / RFID Module, 13.56 MHz, I²C / SPI / UART (Development Board)
Price on request
Per piece